解析“限额设计”措施对建设项目投资的控制对策

经济新常态下,我国建筑行业得到快速发展。对于建筑工程来说,为节约成本,在"限额设计"思想指导下,必须开展精细化管理,从而提高项目投资的控制能力。然而,在项目建设过程中对于"限额设计"措施的利用水平并不高,不利于企业的可持续发展。因此,本文在分析"限额设计"措施的基础上,提出对建设项目投资的控制对策,希望能够对相关施工管理人员提供借鉴。     

Design and characteristics of a new type laminar plasma torch for materials processing

Laminar plasma jet(LPJ) generated by laminar plasma torch(LPT) has a favorable temperature and velocity distribution. Thus, it is superior to the turbulent plasma jet in material processing.However, most of the reported LPTs usually operate at a relatively low output power with a relatively low arc voltage and thermal efficiency, which limits its capabilities. In this context, this paper attempts to design a new type of high-power LPT with a relatively low arc current and a high thermal efficiency. In the first section, the design principle of the main components is studied and discussed in detail, and a new high-power LPT is proposed. Then, the experimental characteristics of the proposed high-power LPT are examined. Experimental results reveal the following characteristics of the proposed LPT.(1) The max jet length of the proposed LPT reaches at 540 mm.(2) Its mean arc voltage is higher than 290 V when the LPT works with arc currents lower than 200 A, leading to an output power greater than 50 kW.(3) The mean thermal efficiency is higher than 50%. Lastly, the proposed LPT has been applied to spheroidize the aluminum oxide powers. The experiment results for the production of spherical powders show that the proposed LPT has a good characteristic for material processing.     

生态伦理视角下的包装设计策略研究

如今人与自然的矛盾愈发凸显,生态系统失衡、资源危机等挑战接踵而至,可持续发展观应运而生,成为时代命题,也是时代目标。包装设计自然应当顺应时代需求,站在生态伦理视角重新思考其发展路径。针对包装中“过度包装”、“用材浪费”等有悖可持续发展要求的现象,从生态伦理视角出发,探究生态环保包装设计策略。引入生态伦理学理论,总结包装设计潜藏的生态伦理挑战,说明绿色生态包装设计的必要性与可行性,结合案例分析并阐述其设计策略,归纳出绿色生态包装设计的基本原则与设计方法。从生态伦理视角审视包装设计,有助于设计者建立生态环保意识与责任意识,了解包装设计的时代需求;同时跳脱出传统思维模式,对包装设计进行优化与创新。     

Modeling and design of 3-D MPPT for ultra low power RF energy harvesters

Radio-Frequency (RF) energy harvesting must cope with the limited availability and high variability of the energy source. In this paper, the modeling of an RF harvester for ultra low power environments is presented. A mathematical model based on theoretical analysis is developed. The model demonstrates that the maximum transferred power point is located in a three-dimensional space defined by the input capacitance, the output voltage, and the load resistance of the rectifier circuit. Moreover, the mathematical model returns results in substantial agreement with the SPICE simulation results, while guaranteeing a remarkable reduction of the required computation time. Furthermore, the paper reports the implementation of a mixed signal system for the 3-D MPPT, to be embedded in an RF harvester, in a 65 nm CMOS technology. The circuit exhibits a simulated power consumption lower than 100 nW, making this solution suitable for ultra low power harvesting.     

How vloggers embrace their viewers: Focusing on the roles of para-social interactions and flow experience

Social media allow marketers to directly influence consumers through a diverse set of tools. The characteristics of individual platforms enable the development of creative and innovative strategies for social media marketing. This study aims at examining para-social interactions (PSI), their antecedents (i.e., attitude homophily and physical attractiveness), and their consequences (i.e., consumers’ sense of belonging, flow experience, urge to purchase, addiction, and impulse purchase). The mediating role of flow experience is also examined in this study. Findings, implications, and directions for further research are also presented in this study.     

基于气动性能与刚度特性的风力机翼型优化设计

结合翼型泛函集成理论与叶片截面刚度矩阵数学计算模型,提出了风力机中等厚度翼型气动性能与结构刚度特性的一体化设计方法,实现了翼型气动性能与叶片截面刚度特性的同时提高。对考虑叶片截面铺层参数变化设计的WQ-B300翼型与DU97-W-300翼型进行了气动性能与结构刚度特性对比分析,结果表明:相比于DU97-W-300翼型,WQ-B300翼型的气动性能与叶片截面刚度性能均有显著提高,其挥舞刚度和摆振刚度分别提高了6.2%和8.4%,验证了该设计方法的可行性,给风力机中等厚度及大厚度翼型设计提供了一种思路。     

Muddling between science and engineering: an epistemic strategy for developing human factors and ergonomics as a hybrid discipline

Human Factors and Ergonomics (HFE) recognises itself as a design-driven, systemic and scientific discipline geared towards well-being and performance. Being a scientific discipline and design-oriented requires that the epistemic basis of science and design/engineering be fully comprehended. In interdisciplinary research where these two viewpoints meet, there are often dilemmas posed in terms of knowledge construction and labelling of activity. Therefore, this article scrutinises these two orientations and addresses the differences and commonalities, using case studies from engineering and psychological science (both constituents of HFE). Based on these insights, a way forward is suggested in terms of (1) a reflexive engagement with epistemic concepts and methods; (2) finding a conceptual space for balancing and bridging the science-engineering divide; (3) comprehending ‘design-thinking/design knowledge’ and not treating it as an application of science; (4) providing emphasis on problem formulation and practices of HFE focusing on developing them in systemic terms.     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。